The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.
Martin Rush MH 6 Wash
£969.00Price
Control and Programming
- Control options: DMX
- DMX channels: 14
- White balance control: RGB adjustment
- 16-bit fine control: Dimming, pan and tilt
- DMX address setting: Control panel with LCD display
Dynamic Effects
- Color mixing: RGBW
- Color presets: 36 color presets plus full white, ‘color wheel’ effects
- Electronic dimming: 0 - 100%, four dimming curve options
- Strobe and pulse effects: Variable speed and action, random strobe
- Electronic 'shutter' effect: Instant open and blackout
- Zoom: Motorized
- Pan: 540°
- Tilt: 200°
Optics
- Light source: 12 x 10 W RGBW Osram Ostar LEDs
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- Zoom range: 10° - 60° *Figure obtained under manufacturer's test conditions
Connections
- AC power in/thru: Neutrik PowerCon
- DMX data in/thru: 3-pin and 5-pin locking XLR
General
- Color: Black
- Housing: High-impact flame-retardant thermoplastic
- Ingress protection rating: IP20
- Mounting points: One quarter‐turn bracket for rigging clamp
- Location: Indoor use only, must be fastened to surface or structure
- Orientation: Any Minimum distance to illuminated surfaces: 200 mm (8 in.)
- Minimum distance to combustible materials: 100 mm (4 in.)
- Minimum clearance around fans and vents: 100 mm (4 in.)
- AC power in/thru: Neutrik PowerCon
- DMX data in/thru: 3-pin and 5-pin locking XLR
Electrical
- AC power: 100-240 V nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Fuse: T 3.15 A
- Recommended Miniature Circuit Breaker*: Type D
- *Per IEC 60898/UL489/CSA C22.2 No. 5
- Power consumption figures are typical, not maximum. Allow for +/-10% variation.
- Typical Power and Current
- 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
- Typical half-cycle RMS inrush current at 240 VAC: 11.3 A
- Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Physical
- Length: 290 mm
- Width: 189 mm
- Height: 360 mm
- Weight: 7.1 kg